DJI Inspire / Phantom3/4 Controller Port Stabiliser
This is a simple but effective stabiliser to prevent the mini HDMI adapter and/or HDMI cable from placing too much strain on the mini HDMI or USB ports of your Inspire controller.
If you use a HDMI cable with your controller for video out then you will know that the cable can place undue strain on the port and eventually may damage the port and make it inoperable. This simple brace works with specific popular size adapters and cable ends to stabilise the point of exit thus greatly reducing any damage to your controller port. It simply clips onto the controller handle and snaps into place. It is intended to be left in place and has no impact on the fitting of the controller in your case.
Please note that whilst this item works with many of the different adapters and cables on the market it cannot and does not work with ALL, simply due to the plethora of different sizes available. However, even if the adapter or cable is smaller than the stabiliser opening it will still provide a level of protection by minimising the amount of movement. It has been designed specifically for this adapter (CPO branded as below image).
USB Adapter: this adapter, now included as standard with quantity to match chosen pack size, adds the ability to use the brace to secure many USB cables in the USB port on the opposite side of the connection panel. The adapter simply clicks in to the HDMI brace after inserting the USB cable through the brace opening.
A great simple product to potentially save a costly and lengthy repair. If you are unsure how this product can save your controller ports or what it is for then check out the video below.